Frequent Connectivity Issues After Upgrading SXR80 + Satellites to 3.2.3.100 Firmware

This past Saturday, I upgraded my Orbi Pro Wifi6 environment (1 router + 2 satellites) to the 3.2.3.100 firmware release as it was supposed to fix an issue I had previously come across/had reported. While that issue does appear resolved, I'm now having a more significant issue.  Roughly every 4-6 hours since yesterday afternoon, devices connected via Wifi to the main router have been losing Internet connectivity.  When I go visually check the router, the magenta light is on, thus indicating an Internet connectivity issue though both yesterday and overnight when this issue apparently surfaced again, I never received any Insight alerts noting a connectivity issue.  I only became aware of one when I checked the LED on the router or the Web UI / Insight app, which showed the router having a "Disconnected" status while both my satellites were online.   I've also found that when Wifi devices connected to my router were having connectivity issues, at least one of my wired devices along still had did.   I also didn't see any indications of connectivity issues with Wifi devices connected to any of my satellites either.

To address the connectivity issues, I've had to power cycle the router several times to this point.  I did try simply rebooting from the Insight app last night when the issue occurred that didn't seem to help (or perhaps I simply didn't wait long for it to fully come up).  In any case, the only real change over the past few days has been the installation of the new firmware release.

I'd be inclined to just revert back to the prior firmware release but not sure that's a viable option or not.   

Appreciate any thoughts/comments on what the issue might be as I'm a bit stumped at the moment.

Bill