NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

mxa's avatar
mxa
Tutor
May 08, 2019
Solved

XR700 Wifi disconnects

Hi all, 

 

I am continuously getting wifi dropouts for certain devices. If i reboot the router or disconnect the device from the wifi it may connect again or may not ...only to disconnect a few mins later. It appears it just does not want to hold on to an ip address. The logs are filled with DHCP lease changes. I have over 50 devices connected wirelessesly some work flawlessly and some dont. Even the devices that do not work sometimes appear to show in the device list as connected.

 

Things I have tried:

Changing all wireless settings

Setting static ips

Netgear support rep thought this was a hardware issue so I returned and purchased another one - this one is exhibiting the same behavior

 

Things that worked temporarily:

Resetting up the network with a new ssid and password and adding each device one by one. (also adding to the list of things I will not do again!) I had about 20 days of stable uptime but after I rebooted the router because DUMAOS page was not loading many tabs. It is back to exhibiting the same behavior.

 

I requested a beta firmware from the DUMAOS forum earlier today but still have not recieved any word yet. 

 

Pretty frustrated at this point and at the point of giving up and getting something else.

  • What is the Mfr and model# of the ISP modem the NG router is connected too?

     

    What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
    Any Wifi Neighbors near by? If so, how many?

     

    Might try downgrading to v20...

64 Replies

  • FURRYe38's avatar
    FURRYe38
    Guru - Experienced User

    What is the Mfr and model# of the ISP modem the NG router is connected too?

     

    What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
    Any Wifi Neighbors near by? If so, how many?

     

    Might try downgrading to v20...

    • mxa's avatar
      mxa
      Tutor

      Yes downgrading to 0.20 and hardresetting a couple of times was my solution, I posted this in another thread since this post didnt get visibility until now.

      • FURRYe38's avatar
        FURRYe38
        Guru - Experienced User

        Good. Thanks for letting us know. :smileywink: