wired backhaul setup for orbi 753

Question

Hello!I have a question for you: i want to replace my old network setup with a mesh system from netgear ( orbi rbk 753). Basically i want to change the current router with Orbi router and then via the lan cbles marked with "x" to plug the 2 sattelites to form a mesh network for a wider wireless cover. Can i keep the switch or must i plug in the cables for the sattelites in the Orbi router?Thanks!

FURRYe38 · Answer

Best way would be to give it a try.&nbsp;
Yes, you can use managed switches. Maybe some configurations needed to make some of those work. IGMP Protocol is one that should be disabled from historical posts.&nbsp;
&nbsp;
The mentioned brands and model switches are ones I've personally tested with my Orbi systems. They work.&nbsp;
&nbsp;
If you get a Orbi system, let us know how it turns out for you. Need any assistance, please post here and we'll help ya out.&nbsp;

archaeus1 · Answer

Bought the RBK753 and works like a charm. But when i set it up, the web interface keeps telling me that the 2 security questions are wrong but i'm 99.99% they are correct ... and now i have to reset and start from the begining....

FURRYe38 · Answer

Yes you can use a switch in between the RBR and RBS.&nbsp;
NON Managed switch is recommended. NG GS-105/108v4 and GS308v3, D-Link DGS-105/108 and HP ProCurve 1400/1800 series switches work for Orbi systems.
Be sure your using a good quality LAN cable between the modem and router. CAT6 is recommended.&nbsp;
https://kb.netgear.com/000051205/What-is-Ethernet-backhaul-and-how-do-I-set-it-up-on-my-Orbi-WiFi-System 📡

archaeus1 · Answer

I have the&nbsp;
TP-LINK TL-SG1016

FURRYe38 · Answer

Check it out and see if it works. Seen some non managed switches with Green Ethernet features cause problems with Orbi systems. Hopefully this will work though.&nbsp;

Forum Discussion

wired backhaul setup for orbi 753

9 Replies