NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Netgear C7000v2 All LAN Links down, only one can be active
Hi All
So recently I ran into some issues with my C7000v2. Only one LAN Link (in the back of the router) can be active at a time. All cables will work, as I have tried several, but only one can be used, which is the cable I am running via powerline adapter to my laptop. My Playstation 4 or Xbox One will not connect via Ethernet. On the Internet Port page in the Genie the image attached is what will show.
As an example, if a cable is run to my playstation, it will work, but another cable run at the same time to my PC will not work.
I have no idea what the issue is, I have power cycled, factory reset, run a cable loop that showed both lights on, everything I know to do. Any help?
2 Replies
Please post about this over in the cable modem forum:
https://community.netgear.com/t5/Cable-Modems-Routers/bd-p/home-cable-modems-routers
Good Luck.
clifftoboggan wrote:Hi All
So recently I ran into some issues with my C7000v2. Only one LAN Link (in the back of the router) can be active at a time. All cables will work, as I have tried several, but only one can be used, which is the cable I am running via powerline adapter to my laptop. My Playstation 4 or Xbox One will not connect via Ethernet. On the Internet Port page in the Genie the image attached is what will show.
As an example, if a cable is run to my playstation, it will work, but another cable run at the same time to my PC will not work.
I have no idea what the issue is, I have power cycled, factory reset, run a cable loop that showed both lights on, everything I know to do. Any help?
Visit http://netgear.com/support , put in your model number, and look
for Documentation. Get the User Manual. Read. Look for "Router Mode",
as in: ADVANCED > Administration > Router Mode.You want "Yes".
