NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
My Windows 10 PC not seen by ReadyNAS
My Windows 10 PC is not discoverable by my ReadyNAS backup device but can be seen by another Windows 10 on the same local network. Perhaps a related issue is that when creating a backup, the ReadyNAS...
Most routers support address reservation - which would result in your NAS getting a consistent IP address. I'd do that first.
Most routers support address reservation - which would result in your NAS getting a consistent IP address. I'd do that first.
OK, I have done that. However, I was hoping to use the hostname explicitly, which would be a more general and elegant solution.
A correctly configured Windows 10 system should be able to discover a current ReadyNAS Build using WSD (WS Discovery), and do the name resolution.
Some legacy NAS - what doesn't apply to the decent ReadyNAS OS 6 systems - require the CIFS/SMB 1.0 Feature (at least client, sometimes also server) enabled, the Windows 10 system is supposed to discover and resolve the name to IP address.
Is Network Discovery enabled in your Win 10 Network settings? If a Win 10 system is dynamically configure to a public network, none of this might work Changing happens by entering \\[NAS-LAN-IP-address] - Windows would challenge you to change the mode.Actually, my problem is reversed: ReadyNAS can not discover the Windows 10 PC. To answer your questions though, in Win10 SMB 1.0 is turned on and discovery is turned on; on Win10 view of the network, both the PC and the ReadyNAS can be seen.
KenHanson wrote:
OK, I have done that. However, I was hoping to use the hostname explicitly, which would be a more general and elegant solution.
Understood. Unfortunately I've found that using IP addresses in ReadyNAS backup jobs is more reliable - even when I'm backing up from another ReadyNAS.
My own approach for PC backup is to run backup software on the PCs that use a network share as the backup destination. Currently I use Acronis TrueImage for this. I like that better for two reasons
- There are no issues with the PC being turned off when the backup runs
- Image backups let me restore the full PC when the PC disk fails, ReadyNAS backup jobs don't.
StephenB - thanks for taking the time to provide your insight. I understand your point of view; having something that works is better than not. Years ago I tried Acronis TrueImage. It worked OK but I disliked the fact that I could only read the backed-up files using their software. So, I opted for backing up with SyncToy to a large external drive until I recently decided it would be safer and "easier" to use an NAS. So far ReadyNAS has worked fine except for the concern expressed in my original post.
Thanks again for pushing me toward the obvious solution.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
