More on CPU specs of the ReadyNAS Pro

Not sure if this thread is dead but I just did some looking through it and wanted to share some feedback for the next one.

Pro 6 stock FLAME 2.0 running 6.4.1.  root@NAS:/# hdparm -t -T /dev/sda

ORIGNIAL CONFIG: E5300 with 1GB PC2-6400 800MHz Memory

 Timing cached reads:   2120 MB in  2.00 seconds = 1059.80 MB/sec

 Timing buffered disk reads: 456 MB in  3.00 seconds = 151.91 MB/sec

NEW CONFIG: E7600 with 1GB PC2-6400 800MHz Memory

 Timing cached reads:   2932 MB in  2.00 seconds = 1465.82 MB/sec

 Timing buffered disk reads: 450 MB in  3.01 seconds = 149.47 MB/sec

FINAL CONFIG: E7600 with 2x2GB PC3-8500 1066MHz Memory (Crucial CT2KIT25664AA1067)

Timing cached reads:   3808 MB in  2.00 seconds = 1904.03 MB/sec

Timing buffered disk reads: 466 MB in  3.01 seconds = 154.86 MB/sec

Not sure why the numbers are low with hdpram compared to some other processors but the apples to apples means I am running 2x here on cashed reads and 1080p Plex videos are running better.