I have a Netgear ReadyNASRND2110 that used to be accessed from my previous router, but after switched to Google WIFI I cannot "see" the device from windows anymore. According to Google support I need the port number to open up the Google router. Does anybody know where to find the port number?

Fralle01 wrote: According to Google support I need the port number to open up the Google router. Does anybody know where to find the port number? Don't know what they are thinking, but that is incorrect. Fralle01 wrote: I have a Netgear ReadyNASRND2110 that used to be accessed from my previous router, but after switched to Google WIFI I cannot "see" the device from windows anymore. Did you configure a static IP address on the NAS? If so, it is likely that your new router is using a different IP address space. Try using RAIDar and see if it can find the NAS (version 6.5 is fine for this): https://kb.netgear.com/20684/ReadyNAS-Downloads If it does discover the address, then check the first three fields (xxx.xxx.xxx ) with the ones used by your new router. If they don't match, then the NAS IP address is no longer compatible with your network. There are a couple of ways to fix this, but let's first confirm that is the problem.

Hi Fralle01, May I know the IP address of your Google router? Do the first three fields of the ReadyNAS' IP address and Google router's IP address match? Regards,

RAIDar discovers the NAS from PC, and IP adress are found 192.168.1.1, status i "in good shape" :-)Now I need to try to find out there to find the IP adress on the Google router.TIps?

According to Googel WIFI the LAN IP group starts with 192.168.86.20, ends up with 250

I.e. no match, som how do I change the IP adress at the NAS without access?

Cannot access my ReadyNAS | NETGEAR Communities

11 Replies

StephenB
Guru
Jun 03, 2020
Fralle01 wrote:

According to Google support I need the port number to open up the Google router. Does anybody know where to find the port number?

Don't know what they are thinking, but that is incorrect.

Fralle01 wrote:

I have a Netgear ReadyNASRND2110 that used to be accessed from my previous router, but after switched to Google WIFI I cannot "see" the device from windows anymore.

Did you configure a static IP address on the NAS? If so, it is likely that your new router is using a different IP address space.

Try using RAIDar and see if it can find the NAS (version 6.5 is fine for this): https://kb.netgear.com/20684/ReadyNAS-Downloads

If it does discover the address, then check the first three fields (xxx.xxx.xxx ) with the ones used by your new router. If they don't match, then the NAS IP address is no longer compatible with your network. There are a couple of ways to fix this, but let's first confirm that is the problem.
- Fralle01
  Aspirant
  Jun 03, 2020
  RAIDar discovers the NAS from PC, and IP adress are found 192.168.1.1, status i "in good shape" :-)
  Now I need to try to find out there to find the IP adress on the Google router.
  TIps?
  - JohnCM_S
    NETGEAR Employee Retired
    Jun 03, 2020
    Hi Fralle01,
    
    May I know the IP address of your Google router?
    
    Do the first three fields of the ReadyNAS' IP address and Google router's IP address match?
    
    Regards,