NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
How to increase write performance on ReadyNAS
You may notice that ReadyNAS may seem a bit slow on writes using the default configuration. There is a way to increase that write performance significantly. First, you will need a Uninterruptable ...
yoh-dah wrote:
kmcgrail wrote:
The USB cable will allow monitoring of the UPS status so the ReadyNAS can shutdown gracefully on batter low. You'll need to use a UPS with a USB connection, and you'll need to use a UPS from our compatibility list -- see http://www.readynas.com/?page_id=76
I was wondering if there had been any follow-up on this issue. I had spoken to Support and explained that we are at a collocation facility with UPS/Generator/ATS but no USB connection. I'd like to turn the write-cache on and you cannot plug in UPSes at most collocation facilities.
Unfortunately, that was a long time ago and I'd like to reiterate my request for a manual, root-ssh-required way to enable the write-cache -or- a way to do it in the advanced interface. I'm running 4.2.5 and 4.1.6 across the board.
regards,
KAM
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
