NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
NAS Pro 6 on OS 6 network dropout
I know i'm unsupported but I wanted to check here to see if anyone is experiencing or has experienced the same issue. I upgraded my Pro 6 to OS 6.9.1. The nas runs fine but once a week the system n...
I haven't measured the currents on the lines, but I wouldn't expect the 3,3V to be the driving factor for the choice of a 300W supply for the ReadyNAS -- it's the 12V for hard drives. While SSD's use 5V for their prime power, I doubt they add enough demand for that to be that critical, either. The Siverstone SST45SF-V3 450W Supply looks to me to be a good alternative, though I've not tried one. It does have ony 2 4-pin MOLEX connectors, so you'll have to use a SATA to 4-pin adapter or move a connector from the old to the new to connect to all three connectors on the SATA backplane, but that's going to be the case with most current supplies. The Silverstone SST-ST30SF 300W would likely work as well, but the small price difference ($10 difference on Amazon) makes me lean toward the one with higher ratings.
Hi,
am expericing the same issue as babeal with my Pro Pioneer. Upgrade to 6.9.0 first and happy with it. But from time to time the storage is not reacting anymore. this happens at different intervals. Shortest was 1 day, longest 2 weeks. Logs are not showing anything useful.
currently on 6.9.3 and still face the issue. Also noticed that after several months the volume is not recognized anymore and I need to reinstall the system. Happened twice till now. last time was 2 days ago.
Just did a new install 2 days ago. ongoing restore of data.
Would be great to know why the system is behaving like this and how to solve it. Will have to wait to the system hangs again to upload logs.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
