NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
NAS won't boot
Hi, used my NAS for a few years now and then had problems connecting to it. I logged into it and all was OK but showed a Firmware update was available so did the update. All whet OK and could acces...
Hi AlanBoats,
Can RAIDar detect the NAS? If it is not detected,
1. Turn off the NAS
2. Remove the drives (Note: Please label with its corresponding bay before you remove them.) and then power on the NAS
3. Check if RAIDar can detect the NAS without the disks.
Regards,
Hi,
OK steps 1 and 2 done.
When I restarted the NAS the power LED flashed 16 times, stayed on for about 7 seconds, flashed one more time and then the light went out. No other lights flashed in the front of the NAS. The fan still runs.
I cannot see the NAS on my home network map.
How can I check if RAID can detect the NAS without the disks?
Alan
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
