NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
NV+V3 Stuck in Resync?
My ReadyNas NV+ V3 notified me that "A SATA reset has been performed on one or more of your disks that may have affected the RAID parity integrity. It is recommended that you perform a RAID volume ...
Thought I'd finish out the post with what I found today...
My concern has been, if the NV+ was in the middle of a resync, would powering down screw up anything and make it unusable.
So I first attempted access to RAIDar and it still would not respond.
I then pulled out the bad drive and, after 3 minutes or so, I got an email of a "Hotplug disk event".
So it wasn't totally hung...
I then unplugged the UPS, hoping the NV+ would do a clean shutdown. But it didn't and the NV+ shut down when the UPS ran out.
I restored power, without the bad drive, and after about 5 minutes, all appears functional...
WHEW!!!
Now I just need the replacement drive from Western Digital...
-bhata
My concern has been, if the NV+ was in the middle of a resync, would powering down screw up anything and make it unusable.
So I first attempted access to RAIDar and it still would not respond.
I then pulled out the bad drive and, after 3 minutes or so, I got an email of a "Hotplug disk event".
So it wasn't totally hung...
I then unplugged the UPS, hoping the NV+ would do a clean shutdown. But it didn't and the NV+ shut down when the UPS ran out.
I restored power, without the bad drive, and after about 5 minutes, all appears functional...
WHEW!!!
Now I just need the replacement drive from Western Digital...
-bhata
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
