NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Reading Old ReadyNas drives on Windows 10
Hello, I need to access my old ReadyNas drives, so I purchased a plug-and-play SATA to USB 3.0 drive to connect my Windows 10 computer to copy some files to another drive. I can see the disk in...
Were you running XRAID or RAID-1 on the NAS?
Is the NAS still available and running?
FWIW, Windows (and MacOS) don't support the needed file system. With Windows, you can try downloading beta software for MDADM and BTRFS. Once that is installed, we could give you some guidance on the commands needed to mount the file system.
You could alternatively purchase RAID recovery software that supports BTRFS, but that is quite expensive.
Running Raid 1
How about accessing the drive with Linux? I'm unable to see the drive at all with Linux.
Or is to the Netgear ReadyNAS is **bleep** and I should have purchased Synology like the rest of the world?
Forseer wrote:
Running Raid 1
How about accessing the drive with Linux? I'm unable to see the drive at all with Linux.
Yes, that will work. Are you saying you aren't seeing the disk at all (in /dev)? If that's the case, the disk is likely dead - you could try the other one.
You need to install mdadm and btrfs. You can then mount the file system.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
