NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS 104: How to manage an attached and identified APC UPS
I’ve just purchased an APC UPS (APC Back-UPS BE850G2 (BE850G2-UK)) and connected the UPS ‘Data Port’ to the USB port on the back of my ‘ReadyNAS 104’ ( 6.10.7) using the supplied cable. My ReadyNAS gives me a message that a UPS has been detected (see attached screen grab). But I can’t see any further ‘UPS’ tab or places on my Admin page to manage this UPS. Under System/System/Settings/Alerts the UPS has a checked tickbox, but that’s about it. Can I , or how can I manage my ReadyNAS and this APC UPS? Thanks!
RoyEsmonde wrote:
I’ve just purchased an APC UPS (APC Back-UPS BE850G2 (BE850G2-UK)) and connected the UPS ‘Data Port’ to the USB port on the back of my ‘ReadyNAS 104’ ( 6.10.7) using the supplied cable. My ReadyNAS gives me a message that a UPS has been detected (see attached screen grab). But I can’t see any further ‘UPS’ tab or places on my Admin page to manage this UPS.
There isn't much to manage - all I see on my own NAS is the abillity to set the NAS shutdown threshold (which defaults to "auto").
But navigate to the "power" tab in the web ui, and you'll see a UPS section. The APC UPS should be shown there, with a settings wheel.
2 Replies
RoyEsmonde wrote:
I’ve just purchased an APC UPS (APC Back-UPS BE850G2 (BE850G2-UK)) and connected the UPS ‘Data Port’ to the USB port on the back of my ‘ReadyNAS 104’ ( 6.10.7) using the supplied cable. My ReadyNAS gives me a message that a UPS has been detected (see attached screen grab). But I can’t see any further ‘UPS’ tab or places on my Admin page to manage this UPS.
There isn't much to manage - all I see on my own NAS is the abillity to set the NAS shutdown threshold (which defaults to "auto").
But navigate to the "power" tab in the web ui, and you'll see a UPS section. The APC UPS should be shown there, with a settings wheel.
Thank you very much, StephenB.
I was following a different online article which suggested the UPS would be seen under 'Settings'. I should have checked 'Power'. Great to know I do have 'Auto' and some other percentage options which I presume refer to UPS battery remaining.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
.jpg){kind=link}