ReadyNAS 1500 and Seagate 3TB - Corrupt Root

Did you just install these disks? If so did you use the disks before putting them in the ReadyNAS?

Did you install all the disks at once?

Is your data backed up?

its a brand new installation drives never being used.... all at once

Did the NAS come with those disks, please take a look at http://www.readynas.com/kb/faq/boot/how_do_i_use_the_boot_menu

Otherwise or if reseating the memory doesn't help, you may wish to try a factory reset (http://www.readynas.com/kb/faq/boot/how_do_i_use_the_boot_menu)

ok got the problem,, was not memory, one harddrive failed, we did a seagate tool test and it failed.

so format all the drives in a PC and re-installed it .... 100%

thank you

ok we are back to where we started with - CORRUPT ROOT..!!!

the device boot up with corrupt root, if i install a 1TB or 2TB constellation drive it works but as soon if i install the 3TB
the system goes corrupt root..

please any idea's

Have you checked the 3TB drive using SeaTools?

When you checked the drives before did you run both short and long tests?

Have you run the memory test?

Memory test is done 100% seagate tools the disks shows 100%

You may wish to open a tech support case (http://www.readynas.com/support). Please edit the thread title (i.e. subject of the first post in the thread to include your case number.

Hello,

I am having exactly the same problem with 3 new Seagate 3TB ST3000DM001 disks, which are also on the HCL...
Did you find any solution on your problem??