NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Readynas 6 Plus destroys volume after shut down with 4.2.19
Just a quick warning for someone who is using the new firmware 4.2.9 x86 (drives 3+ TB) and the new Hitachi 4 TB (3.7TB) drives in 6 slot configuration. I followed the instruction and did test it 3 t...
I have 2 of the seagate 4tb drives and they have been working fine.
viewtopic.php?f=83&t=58447
It could be something specific to the hitachi 4tb (I didnt even know they had a 4tb drive out), or it could be something to do with over 16tb.
Let me get this straight...
you have 6x 4tb hitachi drives
you put all 6 drives in the ULTRA PLUS 6
factory default with all 6 drives
wait for resync to complete
after resync and frontview > volume indicates 'redundant' and you have about 18tb of usable space
you power off the nas (not reboot)
you turn on the nas, then it starts factory default all over again?
what happens if you just put in ONE 4tb drive and factory default?
what happens if you just put in ONE *NON 4tb* drive and factory default?
viewtopic.php?f=83&t=58447
It could be something specific to the hitachi 4tb (I didnt even know they had a 4tb drive out), or it could be something to do with over 16tb.
Let me get this straight...
you have 6x 4tb hitachi drives
you put all 6 drives in the ULTRA PLUS 6
factory default with all 6 drives
wait for resync to complete
after resync and frontview > volume indicates 'redundant' and you have about 18tb of usable space
you power off the nas (not reboot)
you turn on the nas, then it starts factory default all over again?
what happens if you just put in ONE 4tb drive and factory default?
what happens if you just put in ONE *NON 4tb* drive and factory default?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
