NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

dadofjack's avatar
dadofjack
Aspirant
Jul 04, 2017
Solved

Readynas duo , four years switched off and now connected to the wilds of the internet

Hi Folks,

 

i have been living in the US four years and put my ReadyNas Duo in to storage , connected it up now that we are home to the UK , access via web interface  is fine and it is syncing just now,  but i am unsure how best to progress with updating firmware etc or just to let it do it by itself , or force an older update first , i have a lot if photos , music etc that i would prefer not to lose .

 

I am just trying to find out which Duo i have but can't exactly rememeber !

 

Best regards,

 

dadofjack

 

 

  • IF the NAS is running 4.1.x firmware it is a v1.  If it is running 5.x firmware it is a v2.


    dadofjack wrote:

    i have a lot if photos , music etc that i would prefer not to lose .

     

     


     

    If you have data you don't want to lose, then back it up!

     

    Then do a firmware upgrade to the current version.

3 Replies

Replies have been turned off for this discussion
  • StephenB's avatar
    StephenB
    Guru - Experienced User

    IF the NAS is running 4.1.x firmware it is a v1.  If it is running 5.x firmware it is a v2.


    dadofjack wrote:

    i have a lot if photos , music etc that i would prefer not to lose .

     

     


     

    If you have data you don't want to lose, then back it up!

     

    Then do a firmware upgrade to the current version.

    • dadofjack's avatar
      dadofjack
      Aspirant

      Hi Stephen,

       

      Thanks for the prompt reply :-)

       

      my original Duo is syncing at the moment and i didn't want to move it around to check( i'm thinking it's a version 1 )  but i do have another readyNas duo that is version 2 . I will let them both  sync and then do an update . i was just unsure if i needed to follow an upgrade path with the firmware or if it will find the latest compatable version itself and install without issue .

       

      Thank you ,

       

      Dadofjack

      • StephenB's avatar
        StephenB
        Guru - Experienced User

        Best not to move it around - though RAIDar and the admin UI should both be able to show you the current firmware.

         

        Also, if it doesn't say "v2" on the front panel it is a v1.  (The labels on the back are confusing, so ignore those).

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More