NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

Retired_Member's avatar
Retired_Member
Mar 07, 2016

ReadyNAS Duo v2 and larger then 4TB disks?

My old beta Duo v2 unit is suffering a hard drive failure, and I'm pondering what to do with it long term.

 

Currently it has two Seagate 2TB drives. Last week, the second drive went offline which it's done a few times over the years. Normally in the past a simple reseat would kick off a rebuild. However this time, Drive 1 was also starting to see some uncorrectable errors prior to the offline event.  The strain from rebuild now has drive 1 up over 800 uncorrectable errors.

 

Overall I'm not concerned with the data on it, as it simply provided online backups 24/7 when the noisier Ultra 4 unit might be offline. New drive time does open the question of how to move forward with the unit.

 

The HCL only has one 4TB drive listed, and a handful of 3TB drives. A slight upgrade from the current 2TB of available space.

 

OS6 seems to be out of the question due to the newer ARM NAS units using a different ARM Core then the DUO V2 unit. Without a bitrot detecting filesystem, I'm not going to move the Duo v2 into holding primary data. Prior to this failure, I was pondering revamping my entire NAS setup later this year to get BTRFS or ZFS protection somehow.

 

Has anyone else run any larger then 4TB drives in the Duo V2 and the ReadyNAS OS 5 releases?  Ideally, if I could slot in 2x6TB drivesor larger, the unit could last me another few years without needing to be replaced.

 

Thanks,

-Tom

8 Replies

  • kohdee's avatar
    kohdee
    NETGEAR Expert

    You should be able to use 4 TB drives in your NAS devices that run RAIDiator 5.3. The compatibilty list is just a list of tested drives we know worked when we tried it. You use unsupported drives at your own risk. 

     

    OS 6 does have bit rot protection, so I am a little confused on why you don't think an RN2xx device wouldn't suit you (more RAM than RN100 series, better processor, more cores). 

    You would probably want to consider using new drives in an OS 6 box and then using backup job to move your data from NAS to NAS. 

    • StephenB's avatar
      StephenB
      Guru

      kohdee wrote:

       

      OS 6 does have bit rot protection, so I am a little confused on why you don't think an RN2xx device wouldn't suit you (more RAM than RN100 series, better processor, more cores). 


      I think the OP was meaning to say that the v2 can't be upgraded to OS 6.

      • kohdee's avatar
        kohdee
        NETGEAR Expert

        StephenB wrote:
        I think the OP was meaning to say that the v2 can't be upgraded to OS 6.

         

        They can be upgraded to run OS 6 but it is not supported and would still require a factory default. OS 6 on 256 MB of RAM though is painful. 

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More