NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
BlokeUK
Oct 01, 2012Aspirant
ReadyNas NV+ V2 4 bay questions
Hello :D I am looking to purchase either the ReadyNas NV+ V2 4 bay or the Synology Ds413(j) in the next few days, but I would appreciate some clarification before I make a final decision. I ha...
BlokeUK
Oct 08, 2012Aspirant
PapaBear wrote: BlokeUK - the claim for the USB3 standard is up to 5 Gigabits per second, which happens to be 5x the speed of a Gigabit network. It is also far faster than the internal throughput of the NAS units, unless you have a rackmount x-86 based unit which is designed for up to 10 Gigabit per second networks. The theoretical limit for a Gigabit network connection is 112 Megabytes per second (1000/8 for the 8 bits per byte) although some of the older Pros, the new Ultra 6 Plus and the new Pro6 have recorded 120MB/s. It's also 67 percent faster than the SATA 3 theoretical max of 3000Mb/s.
Note also the operative words "up to" which covers a speed range of from 0 to 625MB/s (the theoretical max). Just for grins, since I have a USB3 Flashdrive (Patriot XT 32GB) and recently installed a USB3 add in card to my desktop (C2D E6750, so not the fastest). Copying from my Pro6 to my desktop a 2874MB file took 42 seconds for an average of 68MB/s. Copying that same file from my PC to the flash drive was inconsistent, the first time the copy seemed to stall so I killed it and the second time it took 184 seconds for an average of 16 MB/s. I then tried a test folder of a variety of file, 657 in all plus 25 folders for a total of 683 MB. The first try from the Flash to the PC took 13 seconds for an average of 53MB/s and the second time took only 7 seconds for an average of 98 MB/s. I then tried to copy the test folder from my PC back to the Flash and the first trial took 98 seconds for an average of 7 MB/s and the second time took 62 seconds for an average of 11MB/s.
The card on which the flash drive was packaged says "up to 90MB/s Read" but nothing about writing, which is always slower than reading. On the test with the 600+ files and the 25 folders it did seem to bog down in the write.
Thanks :) I didn't realise this was over ethernet too, so makes sense and very acceptable rates in that case too.
Really appreciate all the effort you have made helping me here.
I also found the wdidle3 tip useful, checked my WD20EARX drives and found the LCC very high on them so going to apply that fix too.
Cheers
Related Content
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!