NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
hilgie
May 19, 2019Aspirant
RN214 fails to come back up after update to 6.10.0
Hi,
After I upgraded my RN21400 to the 6.10.0 firmsware it doesn't come up anymore. On the display it says 'Booting' and it stops at 92%. I can't loggin with Putty neither. If I ping the nas I do get a response. I've switched it on and off multiple times now, all to ni avail.
Does anybody know what I have to do? Help is VERY much appreaciated.
Regards.
Hilgie
hilgie wrote:
I have no idea why the subject is RN312. (Typo?). But it is a RN214.
Thx - I took the liberty of correcting the subject lines.
hilgie wrote:
I've tried the USB recovery FW, but this to no avail.
USB recovery will re-load the firmware install image into the NAS flash memory, but it generally won't reinstall the firmware on the disks.
hilgie wrote:
Does your reply also counts for the RN214 NAS?
Yes. Though it might not help, I think it's worth a try.
6 Replies
Replies have been turned off for this discussion
- StephenBGuru - Experienced User
I suggesting trying on OS reinstall next - see pages 58-59 here:http://www.downloads.netgear.com/files/GDC/READYNAS-100/ReadyNAS_%20OS6_Desktop_HM_EN.pdf It's fixed the issue for some folks here (but not all).
That will reset the NAS admin password to password, reset the network connection to DHCP, and disable volume quota. So you will need to change at least the admin password afterwards.
- hilgieAspirant
Hi,
I have no idea why the subject is RN312. (Typo?). But it is a RN214.
I've tried the USB recovery FW, but this to no avail.
Does your reply also counts for the RN214 NAS?
Cheers
hilgie
- StephenBGuru - Experienced User
hilgie wrote:
I have no idea why the subject is RN312. (Typo?). But it is a RN214.
Thx - I took the liberty of correcting the subject lines.
hilgie wrote:
I've tried the USB recovery FW, but this to no avail.
USB recovery will re-load the firmware install image into the NAS flash memory, but it generally won't reinstall the firmware on the disks.
hilgie wrote:
Does your reply also counts for the RN214 NAS?
Yes. Though it might not help, I think it's worth a try.
Related Content
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!