NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RND4000 v3 not powering on
SN# 23J5127M00528 I powered it down to move it to another location and it does not power back on. It seemed to be working fine up to this.
Then likely the PSU has failed. The hardware warranty is 5 years, so you could check to see if you are still covered. Even if you aren't, you can try contacting netgear support, and see if you can get another PSU.
A new NAS would deliver much higher performance than the NV+, so it is probably not worth a lot of investment (either time or money).
Do you have a backup of the data on the NAS? If not, Netgear support could help you migrate the data (if you buy a new ReadyNAS).
Hi Zombie_Zoo,
No worries. Take a quick look at this document before you take out and replace the PSU of your ReadyNAS unit.
Hoping for a positive result.
Kind regards,
BrianL
NETGEAR Community Team
Also if you use a stock ATX supply, you will need to modify the pinout. You can do this with a 20 pin extension cable.
This pdf gives the pinout: http://www.readynas.com/download/archive/pdf/ReadyNAS_PSU_pinout.pdf
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
