NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Trying to use ST3000DM001 3TB drive in USB dock
I have 4 of these drives in my NV+ and want to use them for backups and/or hot swap for the raid array so I picked up 2 more along with a BlacX eSata dock to use for USB backups. This HDD/dock config ...
Parted comparing two drives, the first (correctly identified as an ST3000DM001) is part of the 4 drive raid while the latter (labeled as the same but recognized as an Initio) is the in the USB dock. The second partition was created on OS/X but is not recognized by the NAS.
Model: Seagate ST3000DM001-9YN1 (scsi)
Disk /dev/sdd: 3001GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 32.8kB 4295MB 4295MB raid
2 4295MB 4832MB 537MB raid
3 4832MB 3001GB 2996GB raid
Model: Initio INIC-1610P (scsi)
Disk /dev/sde: 3001GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 20.5kB 210MB 210MB fat32 EFI System Partition boot
2 211MB 3001GB 3000GB USB3TB005
Model: Seagate ST3000DM001-9YN1 (scsi)
Disk /dev/sdd: 3001GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 32.8kB 4295MB 4295MB raid
2 4295MB 4832MB 537MB raid
3 4832MB 3001GB 2996GB raid
Model: Initio INIC-1610P (scsi)
Disk /dev/sde: 3001GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 20.5kB 210MB 210MB fat32 EFI System Partition boot
2 211MB 3001GB 3000GB USB3TB005
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
