NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Two Nas Units-Frontview won't access both
Hello,
I currently own Readynas Ultra 2 Plus, had it over a year and wanted upgrade to a more powerfull unit with more storage. So i chose the RNDP600U-200nas. After installing the unit i powered it up, and Frontview showed it ready for setup. So clicked away and set it up. I used Frontview to reboot the system. Frontview now showes TWO Nas units ready for acton. However Frontview only allows me to access the first unit. So i powered off the old nas, and then tried to access the new unit again but to no avail. To make matters worse i assumed it was a router issue and hit the factory reset. That also failed. I'm not sure what to do or how to go about it.
If someone could shed some light ......I would GREATLY APPRICIATE IT
I currently own Readynas Ultra 2 Plus, had it over a year and wanted upgrade to a more powerfull unit with more storage. So i chose the RNDP600U-200nas. After installing the unit i powered it up, and Frontview showed it ready for setup. So clicked away and set it up. I used Frontview to reboot the system. Frontview now showes TWO Nas units ready for acton. However Frontview only allows me to access the first unit. So i powered off the old nas, and then tried to access the new unit again but to no avail. To make matters worse i assumed it was a router issue and hit the factory reset. That also failed. I'm not sure what to do or how to go about it.
If someone could shed some light ......I would GREATLY APPRICIATE IT
5 Replies
Replies have been turned off for this discussion
- What do you see in the Info (far right) column in RAIDar for the Ultra 6 Plus?
- I just see blue circle with a white " i ". It won't let me click it either.
- What do you see beneath that circle? Do you see e.g. 4.2.22, corrupt root, something else?
- I have the same issue with an Ultra 2 - RAIDar reports ok, can ping, but no samba or frontview - it would appear to connect via browser but the connect looks to be dropped or timeout. Began after a power loss. disks appear ok (by RAIDar)
- You should open a tech support case.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
