NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS front view backing up jobs
Dear community, Having just found out the my newly purchased ReadyNAS DuoV2, is actually a V1 (Ebay purchase), I have pursued with it and loaded RAIDiator 4.1.8, so far so good. I have read the down...
JasonCP wrote:
I have pursued with it and loaded RAIDiator 4.1.8, so far so good.
Current firmware is 4.1.16, and you should be using that. https://kb.netgear.com/000038792/RAIDiator-Version-4-1-16-Sparc
JasonCP wrote:
I notice that there is no change to the Volume capacity of my RedayNAS (542MB of 1846GB), which is the same before this was done.
The readyNAS Vault is showing 91.53MB of the free 2.00GB used.
Maybe reach out to vault support. You can try sending an email to [email protected]. You could also submit a request via their help desk link: https://support.readynasvault.com
JasonCP wrote:
I have pursued with it and loaded RAIDiator 4.1.8, so far so good.
Current firmware is 4.1.16, and you should be using that. https://kb.netgear.com/000038792/RAIDiator-Version-4-1-16-Sparc
JasonCP wrote:
I notice that there is no change to the Volume capacity of my RedayNAS (542MB of 1846GB), which is the same before this was done.
The readyNAS Vault is showing 91.53MB of the free 2.00GB used.
Maybe reach out to vault support. You can try sending an email to [email protected]. You could also submit a request via their help desk link: https://support.readynasvault.com
Many thanks for your help StephenB, I will download and install 4.1.16 Sparc. If the problem persists, I'll email the support team.
Thank-you again.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
