NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
__out_of_memory+36c on boot
Hello,
Since two weeks, I have an __out_of_memory+36c printed on the front screen from time to time.
At first I thought it was due to my intensive use of the transmission app. I decided to limited the memory used, it worked a bit (after that I only have this bloody message only every 6 hours).
The bad things is that I tried to disable the app from the web UI, but my NAS only worked for ~5-10 minutes.
Now, I get this message right after the boot.
I tried to do an OS Reinstall but nothing changed.
Two weeks ago my system was up-to-date and nothing appeared in the logs.
Any suggestions on my next action?
Thanks by advance for your help,
Regards.
I guess you probably have a lot of snapshots?
You could try updating to 6.7.1 and if you still have problems do an OS Re-install.
4 Replies
Replies have been turned off for this discussion
Can you successfully boot into volume read-only mode?
Which firmware are you running?
Surprisingly I managed to boot into volume read-only mode.
I'm running the version 6.6.1 of the firmware.
I guess you probably have a lot of snapshots?
You could try updating to 6.7.1 and if you still have problems do an OS Re-install.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
