NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
admin page keeps loading in a loop netgear nas 104 after update Version 6.10.5
admin page keeps loading on in a loop netgear nas 104 after update Version 6.10.5 cleared cache on all browsers did not help,did a reset on the os did not help, my unit is a ReadyNAS 104 4 ba...
Had the same problem - Do you have SSH access? If so, your unit isn't "technically" a brick. You should downgrade right away to 6.10.4. (I did that and the problem went away). Contrary to other posts - it has NOTHING to do with the browser version you're using to access the unit - it happens on all browsers - it's a flaw in frontview.
Here are the instructions for the ARM unit (RN102):NB: (you MUST be ssh'ed in as 'root'):
cd /root wget http://www.downloads.netgear.com/files/GDC/READYNAS-100/ReadyNASOS-6.10.4-arm.zip unzip ReadyNASOS-6.10.4-arm.zip echo /root/ReadyNASOS-6.10.4-arm.img > /etc/.flash_update reboot
There is a hotfix that needs to be applied to that release and it will automatically be applied if your NAS settings permit hotfixes to be automatically applied... otherwise - do as you see fit.
Just ignore any further updates to 6.10.5 until they get their act together.
im following the steps but get the point where im selecting the os 6.10.4 and it says comunication error what do i do
jimmysgotya wrote:
im following the steps but get the point where im selecting the os 6.10.4 and it says comunication error what do i do
Not sure exactly what steps you are following. You should be getting the arm zip file from https://kb.netgear.com/000062588/ReadyNAS-OS-6-Software-Version-6-10-4. Then extract the binary from the zip.
Browse to https://nas-ip-address/admin (don't use readycloud, and of course use the real NAS IP address). After logging in, go to system->settings->update and click on the "install firmware" control. when prompted, select the binary file.
sorry might be a bit of a dumb question, but when you say binary you mean the unzipped file or do i need to get something out of the disk img
jimmysgotya wrote:
when you say binary you mean the unzipped file or do i need to get something out of the disk img
I mean ReadyNASOS-6.10.4-arm.img - in other words the unzipped file.
yea i was doing all that and it kept failing i have just downgraded to 6.10.4 using the usb method and its working a treat thanks for you help anyways much appreciate you taking the the time to try and help me out
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
