NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Antivirus scanner definition file update failed
ReadyNAS 212 OSversion 6.10.3 Since a couple of days (starting July 5th) my virus definition file update failes.. stating check internet-connection ; my internet connection is fine because the rea...
I kept getting errors while executing command: 'systemctl status clamav-freshclam.service' ; see below
root@Geldrop:~# systemctl status clamav-freshclam.service
● clamav-freshclam.service - ClamAV virus database updater
Loaded: loaded (/lib/systemd/system/clamav-freshclam.service; static; vendor preset: disabled)
Active: failed (Result: exit-code) since Wed 2020-12-23 14:33:45 CET; 15s ago
Process: 6263 ExecStart=/usr/bin/freshclam --quiet (code=exited, status=1/FAILURE)
Main PID: 6263 (code=exited, status=1/FAILURE)Dec 23 14:33:45 Geldrop systemd[1]: Starting ClamAV virus database updater...
Dec 23 14:33:45 Geldrop freshclam[6263]: ClamAV update process started at Wed Dec 23 14:33:45 2020
Dec 23 14:33:45 Geldrop freshclam[6263]: main.cvd is up to date (version: 59, sigs: 4564902, f-level: 60, builder: sigmgr)
Dec 23 14:33:45 Geldrop freshclam[6263]: daily.cld is up to date (version: 26026, sigs: 4328586, f-level: 63, builder: raynman)
Dec 23 14:33:45 Geldrop freshclam[6263]: bytecode.cvd is up to date (version: 331, sigs: 94, f-level: 63, builder: anvilleg)
Dec 23 14:33:45 Geldrop systemd[1]: clamav-freshclam.service: Main process exited, code=exited, status=1/FAILURE
Dec 23 14:33:45 Geldrop systemd[1]: Failed to start ClamAV virus database updater.
Dec 23 14:33:45 Geldrop systemd[1]: clamav-freshclam.service: Unit entered failed state.
Dec 23 14:33:45 Geldrop systemd[1]: clamav-freshclam.service: Failed with result 'exit-code'.The following I did after reading the following web-page (https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=972974):
stopping clamav: 'systemctl stop clamav-daemon'stopping clamav freshclam: 'systemctl stop clamav-freshclam'
adjusting member 'usr.bin.freshclam' in dir: /etc/apparmor.d ; adding 'capability dac_override,' and 'capability chown,'
capability setgid,
capability setuid,
capability dac_override,
capability chown,removing all file from dir: '/var/lib/clamav' (bytecode ; daily ; main ; mirrors ; antivir)
starting clamav : 'systemctl start clamav-daemon'
starting clamav freshclam: 'systemctl start clamav-freshclam'
starting 'clamav freshclam' takes a while (about 2 minutes, I guess) and afterwards it looks like the normal databased-updater is working again.... lets see what happens the coming days...
regards
ReadyNAS 202, Firmware 6.10.3, 2x 1TB
Hello. I will just say again since I run a daily CRON job my issue is resolved for me. Lets call it a workaround:
- login to your NAS as root via ssh
- 'crontab -e'
- e.g. add: '0 4 * * * /usr/bin/freshclam' - this will execute freshclam daily at 4 a.m.
Focusing on the error message "freshclam[5119]: [LibClamAV] mpool_malloc(): Can't allocate memory (262144 bytes)." I did some investigation. The default SWAP-partition is 512 MB and according to several fora on the internet small.
RAM No hibernation With Hibernation Maximum
256MB 256MB 512MB 512MB
512MB 512MB 1024MB 1024MB
1024MB 1024MB 2048MB 2048MB
RAM No hibernation With Hibernation Maximum
1GB 1GB 2GB 2GB
2GB 1GB 3GB 4GB
3GB 2GB 5GB 6GB
4GB 2GB 6GB 8GB
5GB 2GB 7GB 10GB
6GB 2GB 8GB 12GB
8GB 3GB 11GB 16GBSo I added a swap-file of 512 MB so the total swap-space became 1024MB and will see if CLAMAV will be updated correctly by the default update-process (the first time it did, so fingers crossed).
So if this additional SWAP-file works, maybe it is an idea to add SWAPD package to the installation and therefor is no need to add a pre-defined SWAP-file :-)
rgds Hans
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
