Backup not complete again

update time again.
I finally was successful getting the remote: Window/NAS backup to connect. AND it did a complete backup without missing any files.
Originally I was following the instructions from: http://kb.netgear.com/app/answers/detail/a_id/23424/~/how-do-i-configure-the-remote-source-or-destination-for-a-job-on-my-readynas-os, that says:

8. In the Path field, enter the folder path. If you select a Windows protocol, use a forward slash (/) to separate directories, for example: /<share name>/<folder name>

Which does not work...

I searched and found this: http://www.readynas.com/forum/viewtopic.php?f=31&t=42226, which says:

agree documentation is very poor given it is a key feature, end result user is left to trial and error. I got this working for my PCs including 64bit windows 7: host can be ip address or computer name path should start without / username / password should be a user on the PC in question with admin privilige. I didn't need to fiddle with the homegroup settings either as indicated elsewhere. example: host = 192.168.11.4 path = Users/PC/Documents/Paul/CV user = johnsmith password = example

Which worked!!!