NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Cannot access NAS from windows 10
Really basic network issues which I cannot figure out. I was running Win 7 win ReadyNAS as 192.168.1.x via ASUS router. New win 10 computer and win 7 and NAS went in closet. When moving found NAS...
Thanks for getting back me.
Router and computer are 192.168.50.x
I am using RAIDiator 5.3.13 on NAS and have installed RAIDar 6.5.0 on the computer desktop, I was led to understand I could not install ReadyNAS OS 6 due to the age of my NAS.
RAIDAR 6.5.0 identifies the NAS address as 192.168.1.x
The SMB 1 client is installed and turned on.
Then you must have asigned the NAS a static IP address via the GUI when it was attached to the old router. You have four options:
1. Temporarilly put the old router back in place (just NAS and PC connected is fine), which should give you access. Then, go into the GUI and change the network setting to DHCP (sorry, I don't have an OS5.x system running to say where to do that).
2. Change the default subnet on your new router to match the old.
3. Connect the NAS directly to a computer via Ethernet (cross-over cable is not required), manually set the computer's IP address to something in the 192.168.1.x range (except the NAS address, of course), which should give you access. Then change the network setting as in 1.
4. Perform an OS re-install, which will return the network setting to DHCP and also set the admin password back to the default.
To avoid issues like this, it is best to do an address reservation in your router instead of setting the NAS to a static IP in the NAS GUI.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
