NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Corrupt root Ready NAS 1100
Hope someone can help me out and give me some instructions on what to do.
When i login to my ready NAS 1100 via the Netgear RAIDar app the screen tell me that i have a corrupt root. Screen shot below.
I would like to know if i have to perform a USB boot or is there any other options for me.
If i have to perform a USB boot how do i setup the USB and which system file is the best to use.
Look forward oto you responses.
Thanks Ben
5 Replies
Replies have been turned off for this discussion
What led up to this?
Do you recall which firmware you are running?
USB Boot Recovery is unlikely to be the solution. That is only useful if the firmware on the flash is corrupt.
The problem most likely is a full root volume, a bad disk, or putting in used disks from a PC.Thanks for your reply.
In the lead up i swopped out one of the disck and it formated correctly. However when i swopped out the next disk i started to get problems.
How do i prepare the disks so they will be accepted by the Ready NAS.
I have the right cables to access the disks i just dont know what format is required.
Once i've formatted the disks, whats the best way to load them?
Look forward ot your reply..
Thanks
Benhopkins wrote:
How do i prepare the disks so they will be accepted by the Ready NAS.
I have the right cables to access the disks i just dont know what format is required.
The NAS formats the drives on its own. Sometimes it's helpful to zero them (or unformat them). But formatting them yourself isn't useful, and sometimes can create issues.
What disks are you using? Your best options are NAS-purposed drives (for instance WD Red or Seagate VN) or enterprise-class. Your NAS can't handle drives larger than 2 TB.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
