CPU fan speed stuck at 4218rpm

Question

Hi,&nbsp;The CPU fan seems to be stuck at 4218 &amp; 3515 rpm. Not sure how long it's been like this but at least a week.&nbsp;Room temp = 23cCPU = 45System = 55Disk1 = 38Disk2 = 38Disk3 = 37Disk4 = 39Disk5 = 40Disk6 = 37Fan setting = QuietFile search = disabledAntivirus - enabledSystem fan = 958rpm

StephenB · Answer

What firmware are you running - not sure what to make of&nbsp;V6.9.00 2x2TB (4x6TB)

ipb_uk · Answer

It's on 6.9.2 with 6x6TB disks.I'd forgotten about my signature as it doesn't show on my PC. Hopefully I've updated it and can bee seen by someone, I can't see it in my posts though.

ipb_uk · Answer

Of course the sig. shows silly me.....

Sandshark · Answer

Sounds like a configuration error.&nbsp; If you have SSH enabled, please post the contents of&nbsp;./etc/sensors.d/system.conf.

ipb_uk · Answer

Contents is......&nbsp;chip "colabel temp2 "CPU" compute temp2 @%35, @%35 ignore temp3 &nbsp;chip "w83627dhg-isa-*" label in1 "DDB18" set in1_min 1.62 set in1_max 1.98 &nbsp;set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 label in3 VCC3 set in3_min 3.3 * 0.90 set in3_max 3.3 * 1.10 label in4 VCC1_25 set in4_min 1.17 set in4_max 1.32 label in5 "VCC1_5" set in5_min 1.41 set in5_max 1.58 label in6 "VCC1_05" set in6_min 0.98 set in6_max 1.10 set in7_min 3.3 * 0.90 set in7_max 3.3 * 1.10 set in8_min 3.0 * 0.90 set in8_max 3.3 * 1.10 label fan1 "System" set fan1_min 600 label fan2 "CPU" set fan2_min 150 label fan3 "System" set fan3_min 600 ignore fan4 ignore fan5 label temp1 "System" set temp1_max 80 ignore temp2 ignore temp3 ignore cpu0_vid ignore intrusion0 &nbsp;&nbsp;&nbsp;

Forum Discussion

CPU fan speed stuck at 4218rpm

8 Replies

Related Content

SFP speed

Wifi 7 speeds vs Wifi 6E speeds (Samsung Phones)

Firmware stuck

RBE971 stuck on 100M/Full

C7000v2 Speed Issues

NETGEAR Academy

ProSupport for Business