Forum Discussion

Aspirant

Dec 19, 2016

Solved

Data is not accessible after pluging the 4th HD and upgrading to fw 6.6.0 due to "mv_xor_status+88"

I bought the 4th hard drive today WD Red 4TB. I got another 3 HD plugged already WD Green 4TB. I'm using X-Raid and it was setup as Raid5. After 6% of the re-syncing process NAS Admin was not accessi...

Adding Disks

File Sharing

Installation & Upgrade

Other Discussions

davidbonnici
Dec 26, 2016
Hi Guys!

Resyncing is complete and now the array has expanded properly :) It was one hell of a week!

Thanks StephenB and mdgm-ntgr for your help.
Happy Festive Season!

Best Regards

David

mdgm-ntgr

NETGEAR Employee Retired

Dec 20, 2016

Please send in your logs (see the Sending Logs link in my sig)

davidbonnici
Aspirant
Dec 20, 2016
I sent the logs by email as instructed. Hopefully to get your insight sooner or later. It is still synching as we speak.
- mdgm-ntgr
  NETGEAR Employee Retired
  Dec 21, 2016
  There are problems mounting your volume. I can see that your volume is extremely full.
  
  Perhaps you could try booting into volume read-only mode (a boot menu option).
  
  Do you have a backup?
  - davidbonnici
    Aspirant
    Dec 21, 2016
    Resyncing is complete. I rebooted the NAS and the volume is now appearing again
    
    I have 4x4TB now but it seems like that the new HD is not taken altough it's online. What should I do? Should I remove it and insert it again?