NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Data is not accessible after pluging the 4th HD and upgrading to fw 6.6.0 due to "mv_xor_status+88"
I bought the 4th hard drive today WD Red 4TB. I got another 3 HD plugged already WD Green 4TB. I'm using X-Raid and it was setup as Raid5. After 6% of the re-syncing process NAS Admin was not accessi...
I sent the logs by email as instructed. Hopefully to get your insight sooner or later. It is still synching as we speak.
There are problems mounting your volume. I can see that your volume is extremely full.
Perhaps you could try booting into volume read-only mode (a boot menu option).
Do you have a backup?
Resyncing is complete. I rebooted the NAS and the volume is now appearing again
I have 4x4TB now but it seems like that the new HD is not taken altough it's online. What should I do? Should I remove it and insert it again?
I just proceeded, I turned off the NAS again, removed the 4th HD and when it booted up the status went to DEGRADED. I plugged again the 4th Hard Drive and now it is re-syncing again. This is very odd, I mean I expected that new HD will increase the total capactiy. Let's say it at least I have the data.
What are your recommendations?Thanks a lot!
Best Regards
David Bonnici
Sometimes the NAS makes the added disk a "spare" - I don't understand the mechanism for that choice.
You won't see the volume expansion until the end of the resync, so for now you need to wait.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
