NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
do_exit+890 error RN21400
trying to setup this NAS for the first time.
It displays the error do_exit+890
4 new 2 tb discs.
tried both network plugs. Lights are green but nothing is happening.
got it to boot.
I had 4 discs in there. All with no data but two of them I used to boot an older Readynas Duo that I was unable to start. (that worked by the way) Aparently the new one didn't like those discs. After shuffling them around it started.
I'm going to leave it alone until the power button becomes solid and it cools down. Then I'll put it on the network and see if it runs correctly then slide the other 3 discs in.
4 Replies
Replies have been turned off for this discussion
Which firmware version did this unit ship with? Have you tried a direct-connection between your PC and the NAS?
not sure which firmware. It's not booting.
I'll try to plug directly into a computer and see if it boots.
got it to boot.
I had 4 discs in there. All with no data but two of them I used to boot an older Readynas Duo that I was unable to start. (that worked by the way) Aparently the new one didn't like those discs. After shuffling them around it started.
I'm going to leave it alone until the power button becomes solid and it cools down. Then I'll put it on the network and see if it runs correctly then slide the other 3 discs in.
direct connection not working
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
