Easy fix fan/temp OS6 issues on x86 legacy #no support

Hi guys,

I have now taken the plunge and installed OS6 on my Pro, however, I really need some guidance in terms of stabilising my fan control speeds as well as getting the temp graphs to work.

Thus far I have ready the forum posts and have done the following:

Step 1

apt-get update && apt-get upgrade
apt-get install lm-sensors fancontrol
echo "#fancontrol" > /etc/fancontrol

Step 2
Used the powerconfig command as suggested http://www.readynas.com/forum/viewtopic.php?f=51&t=71155#p395324

Step 3

/etc/init.d/fancontrol stop
/etc/init.d/fancontrol start
/etc/init.d/fancontrol restart

Here is the output after sensors:

root@READYNASPRO:/sys/devices/platform/coretemp.0# sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +27.0 C  (high = +84.0 C, crit = +100.0 C)
Core 1:       +27.0 C  (high = +84.0 C, crit = +100.0 C)
Core 2:       +21.0 C  (high = +84.0 C, crit = +100.0 C)
Core 3:       +21.0 C  (high = +84.0 C, crit = +100.0 C)

w83627dhg-isa-0a10
Adapter: ISA adapter
Vcore:        +1.14 V  (min =  +0.00 V, max =  +1.74 V)
in1:          +1.74 V  (min =  +0.84 V, max =  +1.89 V)
AVCC:         +3.20 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:        +3.20 V  (min =  +2.98 V, max =  +3.63 V)
in4:          +1.22 V  (min =  +0.38 V, max =  +1.32 V)
in5:          +1.49 V  (min =  +0.09 V, max =  +0.30 V)  ALARM
in6:          +1.02 V  (min =  +0.95 V, max =  +1.05 V)
3VSB:         +3.17 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:         +3.07 V  (min =  +2.70 V, max =  +3.63 V)
fan1:        1004 RPM  (min = 42187 RPM, div = 8)  ALARM
fan2:           0 RPM  (min = 10546 RPM, div = 128)  ALARM
fan3:        3125 RPM  (min = 3375 RPM, div = 8)  ALARM
fan4:           0 RPM  (min = 5273 RPM, div = 128)  ALARM
fan5:           0 RPM  (min = 10546 RPM, div = 128)  ALARM
temp1:        +46.0 C  (high = +127.0 C, hyst = +125.0 C)  sensor = thermistor
temp2:        +24.5 C  (high = +80.0 C, hyst = +123.0 C)  sensor = CPU diode
temp3:        +19.5 C  (high = +80.0 C, hyst = +123.0 C)  sensor = thermistor
cpu0_vid:    +0.000 V

Fancontrol file

#fancontrol
INTERVAL=10
DEVPATH=hwmon0=devices/platform/coretemp.0 hwmon1=devices/platform/w83627ehf.2576
DEVNAME=hwmon0=coretemp hwmon1=w83627dhg
FCTEMPS= hwmon1/device/pwm2=hwmon1/device/temp2_input hwmon1/device/pwm1=hwmon1/devic
FCFANS= hwmon1/device/pwm2=hwmon1/device/fan2_input hwmon1/device/pwm1=hwmon1/device/
MINTEMP= hwmon1/device/pwm2=30 hwmon1/device/pwm1=55
MAXTEMP= hwmon1/device/pwm2=60 hwmon1/device/pwm1=60
MINSTART= hwmon1/device/pwm2=70 hwmon1/device/pwm1=16
MINSTOP= hwmon1/device/pwm2=70 hwmon1/device/pwm1=16
MINPWM= hwmon1/device/pwm2=70 hwmon1/device/pwm1=16
MAXPWM= hwmon1/device/pwm2=200 hwmon1/device/pwm1=80

I have modded by Pro with a q6600.

Any help would be appreciated.