Final 6.2.1 update causing LAN instability/sluggishness

My router has no port forwardings at all.
Extra software:
- LMS Logitech Media Server
- CCU Historian
- Ubiquiti UniFi video
- Ubiquiti UniFi controller
...UniFi controller is new, there was no reboot since installing it (until today of course).

Sent from my iPad using Tapatalk HD

Where did you see the release notes for 6.2.1 final?

Here: http://kb.netgear.com/app/answers/detail/a_id/26242

... although that should probably be in the "6.2.1 Release Notes" thread where this issue first came to light. :-)

Same here router issue and nas not visible on my computer win 7

As mentioned in nsne's other posting:
After upgrading my 312 from 6.2 to 6.2.1 strange things occurred: the router (AVM Fritz!Box 7240) got hung up. I had to power cycle it.
Since then all network traffic seems to come to a halt, while the 312 is connected to the LAN.
I am not able to connect to the NAS. OS reinstall did not help.


Sent from my iPad using Tapatalk HD

I upgraded my 312 tonight, now I have no UI at all. I can access shares just fine. Is there a way to load the OS without having to wipe everything?

Your problem isn't the same as the others in the thread, I think.
What happens when you try to access the GUI, and how are you doing this? (https://ipaddressofnas) in a browser or Readycloud?
Have you cleared your browser cache?

I just get "This web page is not available".

I have Plex installed whish is running fine, just no NAS UI. I tried a OS re-install but it's still not presenting a UI.

Access is https://ip, but now remote access isn't working either via Readycloud.

Edit: Readycloud is working.

Sounds like broken apache config.

Do you have a backup? Can you access your data?

I brought my RN312 to another site. It started up.
Rear panel Ethernet port LEDs are green on / green flashing permanently (hm, according to the hardware guide, it should be green blinking / amber off).
But since then, the internet router got into an infinite boot loop at this site too (AVM Fritz!Box 6360 cable).

I can log into Admin Page. The Network interfaces tab is empty.
Logs do not show any error messages.

I was able to make a ssh connection (takes a while) and execute top:

top - 15:04:40 up 44 min,  3 users,  load average: 2.07, 2.08, 2.11
Tasks: 172 total,   2 running, 170 sleeping,   0 stopped,   0 zombie
%Cpu(s):  8.7 us, 17.2 sy,  0.0 ni, 73.7 id,  0.0 wa,  0.0 hi,  0.4 si,  0.0 st
KiB Mem:   2038072 total,  2002548 used,    35524 free,     1604 buffers
KiB Swap:   523964 total,        0 used,   523964 free,   919672 cached

  PID USER      PR  NI  VIRT  RES  SHR S  %CPU %MEM    TIME+  COMMAND
 1715 root      20   0 23232 2412 2100 R  99.2  0.1  43:05.64 connmand
 2550 unifi-vi  20   0 2314m  49m  18m S   1.3  2.5   0:11.47 mongod
   15 root      20   0     0    0    0 S   0.7  0.0   0:05.99 ksoftirqd/2
 2221 mysql     20   0  475m  42m 6936 S   0.3  2.1   0:02.07 mysqld
 2236 unifi-vi  20   0 3657m 337m  16m S   0.3 16.9   1:39.43 jsvc
 2589 root      20   0  503m  55m  25m S   0.3  2.8   0:05.73 mongod
 5268 root      30  10 28556 1616 1132 R   0.3  0.1   0:04.88 top
    1 root      20   0 45624 4360 2004 S   0.0  0.2   0:02.76 systemd

Something seems to be wrong with this connmand.
I think it is some kind of network connection manager, but I do not have a clue.
The change date of /usr/sbin/connmand is 2014-12-17 02:46:07

Any idea, what I should do from this point on?


Kind regards, frantic