NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Is My UPS Set Up Correctly?
I have several CyberPower UPS systems. When connected to a computer with the USB cable I have always had to install a CyberPower program to allow the computer to shut down gracefully or to test the UPS, etc. When I connected my UPS to my ReadyNAS with the USB cable, the UPS showed up automatically under admin page>system>power>UPS. I haven't installed any software and there doesn't seem to be any way of changing any settings for the UPS.
Is everything as expected? Will my NAS power off gracefully with a prolonged power failure without any additional input from me? Thanks!
4 Replies
Replies have been turned off for this discussion
It should work fine. The NAS automatically detects the UPS.
If you are not sure and want to test things out power down the NAS. Connect the NAS power to the wall outlet, but the USB cable to the UPS.
Unplug the power to the UPS and see if the NAS gracefully shuts down before the UPS battery runs out or if it keeps running.Clever! So I guess the UPS will not know that the NAS is actually powered by a separate wall outlet? It should just realize that it (the UPS) has no power, so should initiate the shutdown of whatever is connected by USB? That sounds like it could work. :)
Yes, but with no load, it could take a while to run down the battery. Attaching a 100W incandescent light to the UPS can shorten the time.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
