Forum Discussion

Follower

Dec 17, 2019

Solved

NAS214 Not Responding SMB2_tcon+184

ReadyNas 214 not responding RN214 screen displays "SMB2_tcon+184" no network connectivity , can't shut it down from the Power button . i had to unplug its cable to make it work. no errors...

gobelijn
Feb 27, 2020
Hi
This is solved in firmware version 6.10.3.
Regards
G

gobelijn

Aspirant

Jan 17, 2020

All my backups are initiated out of the NAS. So I was trying to set it up that way.

I shared my e.g. \Users\<user> directory and tried to backup the Pictures folder below. The RN recognized the shared partition but when I start to browse towards that folder, I get the infamous error message.

Similar to what Sakib51 describes.

gobelijn

Aspirant

Feb 27, 2020

This is solved in firmware version 6.10.3.

Regards

StephenB
Guru - Experienced User
Feb 27, 2020
gobelijn wrote:
This is solved in firmware version 6.10.3.

There is no 6.10.3 available for download. Can you confirm the version? If it is 6.10.3, where did you get it?
- JohnCM_S
  NETGEAR Employee Retired
  Feb 27, 2020
  Hi StephenB,
  
  There is no 6.10.3 available for download. Can you confirm the version? If it is 6.10.3, where did you get it?
  
  Here is the link for the 6.10.3:
  
  https://kb.netgear.com/000061727/ReadyNAS-OS-6-Software-Version-6-10-3
  
  Regards,
  - StephenB
    Guru - Experienced User
    Feb 27, 2020
    JohnCM_S wrote:
    
    Hi StephenB,
    
    There is no 6.10.3 available for download. Can you confirm the version? If it is 6.10.3, where did you get it?
    
    Here is the link for the 6.10.3:
    
    https://kb.netgear.com/000061727/ReadyNAS-OS-6-Software-Version-6-10-3
    
    Regards,
    
    Thx. Looks like it was published earlier today.