NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
NetGear RN10200 no network link
Hi,
I've been using my NAS for a while now and today I noticed I couldn't connect. After some tests, I realised that there is no network link.
Tested multiple cables, ports, even direct connection, no luck. The green LED stays on regardless if the cable is in or not but the amber one doesn;t lit like before ( as I recall ). Switch port light doesn't come up either so I'm inclined to say this is the network card on the NAS. The rest seems to be ok with it.
I also tried with another disk, still nope.
Thanks in advance
Thanks, Stephen!
I did that, no luck. So I decided to open it and check for any signs of burn damage as I cam home the other day and the master fuse on the apartment was blown. I took out the network and USB card and put it back in. Success! The LED for traffic was on and it's working like a charm now. Thanks for your help!
2 Replies
Replies have been turned off for this discussion
Yet another option is to remove the disk altogether, and see if RAIDar sees the NAS.
The warranty is 3 years for the original purchaser, you can check warranty coverage (and arrange for an RMA if you are covered) at my.netgear.com.
Thanks, Stephen!
I did that, no luck. So I decided to open it and check for any signs of burn damage as I cam home the other day and the master fuse on the apartment was blown. I took out the network and USB card and put it back in. Success! The LED for traffic was on and it's working like a charm now. Thanks for your help!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
