NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
No access to shares after disabling SMB1 as recommended by Microsoft
Hi everyone, in view of the latest WannaCry/Crypt attack on 12 May 2017, Microsoft recommended to patch my Windows 10 OS and disable SMB 1.0/CIFS File Sharing Support. Check this link: ht...
On RAIDiator 4.1 and RAIDiator 5.3, they use versions of Samba that do not support SMB2. You will need to use the Windows tricks to re-enable SMB1 support.
On RAIDiator 4.2, it can support SMB2 but you may experience a performance hit that you could find unacceptable.
We can see about creating an unofficial add-on for RAIDiator 4.2 boxes that you can use at your own risk to be use SMB2. These devices were not meant to run SMB2 though. All of the RAIDiator boxes are older than 5 years. It might be time for an upgrade.
If you are really concerned, you can unofficially upgrade most RAIDiator 4.2 boxes to OS 6 at the risk of factory defaulting your NAS and putting your data back onto the volumes. Alternatively, you can upgrade to a newer ReadyNAS and use the old ReadyNAS as a backup (always smart to have multiple backups, which eliminates single point of failure).
I got SMB2 working on my old ReadyNAS Pro running the latest 4.2.31 x86 by installing the enablerootssh plugin and using WinSCP to edit the /etc/samba/samba.conf file and adding the following line to the global section:
max protocol = SMB2
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
