NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
NVX - keep 2nd ethernet-interface online after shutdown
Hi,
is there any chance to keep the 2nd ethernet interface "on" after system shutdown ?
If wake-on-lan is activated the NVX keeps the eth0 online (with 10 Mbit half), but eth1 is offline. -> Wake-on-lan works
But if I activate LACP in combination with my switch (D-Link) then wake-on-lan does not work anymore, because the switch kills the LACP group due to the fact that one link of the LDAP group is down.
I tried already several things in /etc/network/interfaces and also in init.d/halt but no success. The eth1 goes down everytime the system halts.
Regards
Kivas
is there any chance to keep the 2nd ethernet interface "on" after system shutdown ?
If wake-on-lan is activated the NVX keeps the eth0 online (with 10 Mbit half), but eth1 is offline. -> Wake-on-lan works
But if I activate LACP in combination with my switch (D-Link) then wake-on-lan does not work anymore, because the switch kills the LACP group due to the fact that one link of the LDAP group is down.
I tried already several things in /etc/network/interfaces and also in init.d/halt but no success. The eth1 goes down everytime the system halts.
Regards
Kivas
Replies have been turned off for this discussion
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
