Can anyone advise on how the new features added in OS 6.10 (Highlit in RED below) can be viewed/accessed ? " New Features and Enhancements: ReadyTIER support for data tiering, including Allowing all writes to the ReadyNAS to benefit from SSD Addition of data tier migration options Volume Performance charts which provide more information when you have multiple RAID Groups Added Audit logging Audit helps provide monitoring and logging for each of the protocols for specified shares and the admin interface. Audit provides logs for login attempts, reads, writes, and deletes Audit archive function allows you to save a duration of audit logs Added Established connections to provide information about active connections Improved the current logging and searching capability Improved Amazon Drive support including allowing users to migrate configs to newer cloud sync options Added ADS Import Timeout (sec) setting Added maintenance and updates options that allow you to configure for hot fixes or email notifications USB labels are now displayed and editable USB share names are now editable Shares have the options to display the number of files, folders and space consumed.

The Consumed space calculation has been removed from the UI at this time. We found a critical memory related issue with this feature just before we were releasing. We are working on a fix for this memory issue to bring the feature back in the up coming release.

Please hurry on the space calculation feature....that would be really useful. That said, I completely understand the criticality of memory and how hard they are to fix. it would have been great to mention this removal on the release notes, though.

Hi bedlam1 Audit logging, Established connections and Improved logging can all be found by going to System>Logs Improved logging gives customers more options on what they can filter, such as the level of severity, the category issue type, and setting date range filters. Search is also allowed now. Audit logging was a highly requested feature that has been included on 6.10. You can audit protocols based on actions, user, file/folders. date ranges, and host/ip. This can be found on System>Logs>Audit. You may have to enable Auditing through System>Settings Established connections found under System>Logs>Connections lets you see all active connections on the ReadyNAS. It's helpful for determining current usage and activity. You will be able to see the total number of consumed space and files on all shares by going into the share properties/settings. Calculation is independent of Quota, so Quota will not be required to be enabled to see this numbers. Most likely Settings for Maintenance and Update options will be under System>Settings. Hope this helps! Regards

Marc_V wrote: You will be bale to see the total number of consumed space and files on all shares by going into the share properties/settings. Calculation is independent of Quota, so Quota will not be required to be enabled to see this numbers. Is this perhaps only visible when quotas are not enabled? I'm not finding this.

The feature should be within the Share's setting under the Auto-defrag option and above the size/quota setting.There should also be a text link that says "Calculate" This should be visible even if Quota is not enabled, please let us know if there are any issues. Regards

OS 6.10 Release | NETGEAR Communities

13 Replies

Replies have been turned off for this discussion

Marc_V
NETGEAR Employee Retired
Mar 27, 2019
Hi bedlam1

Audit logging, Established connections and Improved logging can all be found by going to System>Logs

Improved logging gives customers more options on what they can filter, such as the level of severity, the category issue type, and setting date range filters. Search is also allowed now.

Audit logging was a highly requested feature that has been included on 6.10. You can audit protocols based on actions, user, file/folders. date ranges, and host/ip. This can be found on System>Logs>Audit. You may have to enable Auditing through System>Settings

Established connections found under System>Logs>Connections lets you see all active connections on the ReadyNAS. It's helpful for determining current usage and activity.

You will be able to see the total number of consumed space and files on all shares by going into the share properties/settings. Calculation is independent of Quota, so Quota will not be required to be enabled to see this numbers.

Most likely Settings for Maintenance and Update options will be under System>Settings.

Hope this helps!

Regards
- Sandshark
  Sensei - Experienced User
  Mar 27, 2019
  Marc_V wrote:
  
  You will be bale to see the total number of consumed space and files on all shares by going into the share properties/settings. Calculation is independent of Quota, so Quota will not be required to be enabled to see this numbers.
  
  Is this perhaps only visible when quotas are not enabled? I'm not finding this.
  - Marc_V
    NETGEAR Employee Retired
    Mar 27, 2019
    The feature should be within the Share's setting under the Auto-defrag option and above the size/quota setting.There should also be a text link that says "Calculate"
    
    This should be visible even if Quota is not enabled, please let us know if there are any issues.
    
    Regards
- msq
  Apprentice
  Apr 24, 2019
  This can be found on System>Logs>Audit. You may have to enable Auditing through System>Settings
  
  Established connections found under System>Logs>Connections lets you see all active connections on the ReadyNAS. It's helpful for determining current usage and activity.
  
  Hi,
  
  After uptodae on one of my RND102 devices to 6.10.0 hotfix 2 I can't see any of those:
  
  option to enable audit on the system >> settings page. The only new thing for me here (apart from missing av, but saw that in release notes) is the "Maintenance and Updates" part with two checkboxes for updates notification and auto-apply hotfix, nothing more
  
  system >> logs >> audit. It is just not there
  
  system >> logs >> connections, again - it is just not there
  
  Any chance those are not available on RND10x devices or for some reason were (temporary ..?) removed in hotfix 2 release?
  
  Thank you for your help!
  - StephenB
    Guru - Experienced User
    Apr 24, 2019
    msq wrote:
    
    This can be found on System>Logs>Audit. You may have to enable Auditing through System>Settings
    
    Any chance those are not available on RND10x devices or for some reason were (temporary ..?) removed in hotfix 2 release?
    
    The auditing is only available on the x86 NAS - not the RN100, RN200, or RN210 platforms.

Forum Discussion

OS 6.10 Release

13 Replies

Related Content

Downgrading Readynas from OS 6.10 to 6.9.x

New - RS700S Firmware Version 1.0.9.6 Released

New - RBE970 / RBE971 Firmware Version 9.13.1.2 Released

New - RBE770 / RBE771 Firmware Version 10.5.19.5 Released

New - RS200v1/RS500/RS600 Firmware Version 1.0.5.12 Released

NETGEAR Academy

ProSupport for Business