Forum Discussion

Apprentice

Mar 20, 2013

Solved

OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!

Update: It is now unofficially possible using NTGR images to update legacy hardware to os6.X See Post #3, for directions to install 6.2.1 on x86 Ultra and Pro Models. (ARM NOT SUPPORTED by this OS) ...

ReadyNAS OS 6 on Legacy models

StephenB
Jan 21, 2016
mdgm and I have decided that its time to lock this thread. So please do post any new OS6 on Legacy issues on their own threads.

dejhon

Guide

Jan 02, 2016

Has anyone else been having issues with their Pro6 on OS 6?

I'm on 6.4.1 and have to constantly reboot the Pro. It will often drop off the network and I won't be able to access frontview via the name or ip address (static ip).

Only running Plex, Transmission 3 (2.82) and SickRage from RNXtras.

I'm so over needing to babysit this this constantly and any help would be GREATLY appreciated!

DanEarman

Aspirant

Jan 02, 2016

I am also having the same problem with the Readynas dropping off the network. It seems to occur every 1-2 weeks and requires a power off reset to get it back. I am running Firmware 6.4.1 and only running the BTSync add-on.

grimloch
Aspirant
Jan 07, 2016
I'm having the same problem as dejhon and DanEarman. Were you two able to solve it where your NAS was falling off the network on 6.4/6.4.1?
- DanEarman
  Aspirant
  Jan 11, 2016
  Grimloch, I am still having issues with my ReadyNAS pro dropping off the network. However, I saw a reference that the 6.4.2 Beta is supposed to resolve at least one set of lockups. At this point, I am planning to wait for the official version to come out and then give it a try.
mvrana
Tutor
Jan 18, 2016
DanEarman wrote:
I am also having the same problem with the Readynas dropping off the network. It seems to occur every 1-2 weeks and requires a power off reset to get it back. I am running Firmware 6.4.1 and only running the BTSync add-on.

Add me to the list. Though even a power-off reset doesn't seem to do the trick. Right now my Reaynas Ultra 2 is off the WAN network, though I can reach it locally.
- StephenB
  Guru - Experienced User
  Jan 18, 2016
  mvrana wrote:
  
  Add me to the list. Though even a power-off reset doesn't seem to do the trick. Right now my Reaynas Ultra 2 is off the WAN network, though I can reach it locally.
  
  If you are talking about Readycloud, then that is a different problem.