NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!
Update: It is now unofficially possible using NTGR images to update legacy hardware to os6.X See Post #3, for directions to install 6.2.1 on x86 Ultra and Pro Models. (ARM NOT SUPPORTED by this OS) ...
mdgm and I have decided that its time to lock this thread. So please do post any new OS6 on Legacy issues on their own threads.
I am toying with the idea of moving one of my Pro 6's to OS6. Can anyone clarify :-
Is there an easy way to ensure there are no fan or LCD display issues?
Has anyone used ISCSI support?
Has anyone used Jumbo frames
Is there any reason why the system should be faster / slower with the new disk format?
Do the same limitations exist that you cannot expand a system in place from below 16TB to above 16TB without a complete format? (wondering whether to buy new disks before the OS6 install)
There has been a long standing issue with the Pro 6 where the Nics fail under high load. Has anyone seen this issue when OS6 is installed?
Any other issues, regardless how small?
Thanks!
Is there an easy way to ensure there are no fan or LCD display issues?
Has anyone used ISCSI support?
Has anyone used Jumbo frames
Is there any reason why the system should be faster / slower with the new disk format?
Do the same limitations exist that you cannot expand a system in place from below 16TB to above 16TB without a complete format? (wondering whether to buy new disks before the OS6 install)
There has been a long standing issue with the Pro 6 where the Nics fail under high load. Has anyone seen this issue when OS6 is installed?
Any other issues, regardless how small?
Thanks!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
