NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!
Update: It is now unofficially possible using NTGR images to update legacy hardware to os6.X See Post #3, for directions to install 6.2.1 on x86 Ultra and Pro Models. (ARM NOT SUPPORTED by this OS) ...
mdgm and I have decided that its time to lock this thread. So please do post any new OS6 on Legacy issues on their own threads.
Hi,
I have some Ultra 6 RNDU6000 (atom D510 1,66Mhz) and I decided to upgrade one to OS6.0.4.
My Ultra 6 run with OS6 since a couple of days. OS6 works fine and quickly on legacy NAS, but I have issues on loud fan and temperatures.
I tried to install lm-sensors, had an issue with it87 & coretemp in sensors-detect command, used modprobe to load drivers, created xxx.conf in /etc/sensors.d
... but nothing ....
... fan run always at 1785 rpm and temperatures are bad !!!
Here is result of sensors command :
coretemp-isa-0000
Adapter: ISA adapter
Core1: +41.0°C (high = +80.0°C, crit = +100.0°C)
Core2: +41.0°C (high = +80.0°C, crit = +100.0°C)
it8721-isa-0a10
Adapter: ISA adapter
V+12: +12.19 V (min = +12.24 V, max = +12.24 V) ALARM
V5_0: +5.00 V (min = +5.14 V, max = +5.14 V) ALARM
V3.3: +3.28 V (min = +4.69 V, max = +5.04 V) ALARM
NC: +0.00 V (min = +0.00 V, max = +0.00 V) ALARM
VCOR: +0.97 V (min = +0.00 V, max = +0.00 V) ALARM
VDIMM: +1.81 V (min = +0.94 V, max = +1.09 V) ALARM
V-12: -12.10 V (min = +7.74 V, max = +7.74 V) ALARM
3VSB: +3.24 V (min = +6.12 V, max = +6.12 V) ALARM
VBat: +3.31 V
fan1: 0 RPM (min = 900 RPM) ALARM
fan2: 0 RPM (min = 900 RPM) ALARM
fan3: 1785 RPM (min = 54 RPM)
Temp1: +0.0°C (low = +0.0°C, high = +80.0°C) sensor = thermistor
Temp: +0.1°C (low = +0.0°C, high = +80.0°C) sensor = thermal diode
temp3: +0.1°C (low = +59.0°C, high = +125.0°C) sensor = thermal diode
cpu0_vid: +2.050 V
and GUI panel reports fans at 5355 rpm, aux & system at 40°C and cpu at 43°C
I need your help !!! any idea ?
Best regards
I have some Ultra 6 RNDU6000 (atom D510 1,66Mhz) and I decided to upgrade one to OS6.0.4.
My Ultra 6 run with OS6 since a couple of days. OS6 works fine and quickly on legacy NAS, but I have issues on loud fan and temperatures.
I tried to install lm-sensors, had an issue with it87 & coretemp in sensors-detect command, used modprobe to load drivers, created xxx.conf in /etc/sensors.d
... but nothing ....
... fan run always at 1785 rpm and temperatures are bad !!!
Here is result of sensors command :
coretemp-isa-0000
Adapter: ISA adapter
Core1: +41.0°C (high = +80.0°C, crit = +100.0°C)
Core2: +41.0°C (high = +80.0°C, crit = +100.0°C)
it8721-isa-0a10
Adapter: ISA adapter
V+12: +12.19 V (min = +12.24 V, max = +12.24 V) ALARM
V5_0: +5.00 V (min = +5.14 V, max = +5.14 V) ALARM
V3.3: +3.28 V (min = +4.69 V, max = +5.04 V) ALARM
NC: +0.00 V (min = +0.00 V, max = +0.00 V) ALARM
VCOR: +0.97 V (min = +0.00 V, max = +0.00 V) ALARM
VDIMM: +1.81 V (min = +0.94 V, max = +1.09 V) ALARM
V-12: -12.10 V (min = +7.74 V, max = +7.74 V) ALARM
3VSB: +3.24 V (min = +6.12 V, max = +6.12 V) ALARM
VBat: +3.31 V
fan1: 0 RPM (min = 900 RPM) ALARM
fan2: 0 RPM (min = 900 RPM) ALARM
fan3: 1785 RPM (min = 54 RPM)
Temp1: +0.0°C (low = +0.0°C, high = +80.0°C) sensor = thermistor
Temp: +0.1°C (low = +0.0°C, high = +80.0°C) sensor = thermal diode
temp3: +0.1°C (low = +59.0°C, high = +125.0°C) sensor = thermal diode
cpu0_vid: +2.050 V
and GUI panel reports fans at 5355 rpm, aux & system at 40°C and cpu at 43°C
I need your help !!! any idea ?
Best regards
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
