NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!
Update: It is now unofficially possible using NTGR images to update legacy hardware to os6.X See Post #3, for directions to install 6.2.1 on x86 Ultra and Pro Models. (ARM NOT SUPPORTED by this OS) ...
mdgm and I have decided that its time to lock this thread. So please do post any new OS6 on Legacy issues on their own threads.
christerj77's symptoms when updating to R6 are consistent with not doing the required factory default (wipes all data, settings, everything) as part of the procedure to update to ReadyNAS OS 6.
This is not a case where USB Boot Recovery should have been attempted.
The Prep add-on if installed before the firmware update should force a factory default as part of the upgrade. If it doesn't you can still do a factory default via the boot menu.
This is not a case where USB Boot Recovery should have been attempted.
The Prep add-on if installed before the firmware update should force a factory default as part of the upgrade. If it doesn't you can still do a factory default via the boot menu.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
