OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!

pywong wrote:

I have the ReadyNAS Pro 6 and this is my values for /etc/fancontrol INTERVAL=5 DEVPATH=hwmon0=device/platform/coretemp.0 hwmon1=devices/platform/w83627ehf.2576 DEVNAME=hwmon0=coretemp hwmon1=w83627dhg FCTEMPS=hwmon1/device/pwm2=hwmon1/device/temp2_input hwmon1/device/pwm1=hwmon1/device/temp1_input FCFANS=hwmon1/device/pwm2=hwmon1/device/fan2_input hwmon1/device/pwm1=hwmon1/device/fan1_input MINTEMP=hwmon1/device/pwm2=20 hwmon1/device/pwm1=20 MAXTEMP=hwmon1/device/pwm2=60 hwmon1/device/pwm1=60 MINSTART=hwmon1/device/pwm2=45 hwmon1/device/pwm1=15 MINSTOP=hwmon1/device/pwm2=14 hwmon1/device/pwm1=10 MINPWM= hwmon1/device/pwm2=70 hwmon1/device/pwm1=15 MAXPWM= hwmon1/device/pwm2=150 hwmon1/device/pwm1=150 Correct me if I'm wrong but I think theses are the best values so far, I think a little more test is in order once the volume rebuild is complete.

Here's my updated fancontrol file
INTERVAL=5
DEVPATH=hwmon0=devices/platform/coretemp.0 hwmon1=devices/platform/w83627ehf.2576
DEVNAME=hwmon0=coretemp hwmon1=w83627dhg
FCTEMPS= hwmon1/device/pwm2=hwmon1/device/temp2_input hwmon1/device/pwm1=hwmon1/device/temp1_input
FCFANS= hwmon1/device/pwm2=hwmon1/device/fan2_input hwmon1/device/pwm1=hwmon1/device/fan1_input
MINTEMP= hwmon1/device/pwm2=20 hwmon1/device/pwm1=40
MAXTEMP= hwmon1/device/pwm2=60 hwmon1/device/pwm1=65
MINSTART= hwmon1/device/pwm2=45 hwmon1/device/pwm1=15
MINSTOP= hwmon1/device/pwm2=14 hwmon1/device/pwm1=10
MINPWM= hwmon1/device/pwm2=70 hwmon1/device/pwm1=15
MAXPWM= hwmon1/device/pwm2=240 hwmon1/device/pwm1=75

But I am still having problems it does not seem to be working, the fan speed does not change and it's quite loud.
Also the LCD does not seem to turn off.

So it looks like that the new OS6 does not work on the ReadyNAS Pro 6.

Any Ideas?

Thanks