NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!
Update: It is now unofficially possible using NTGR images to update legacy hardware to os6.X See Post #3, for directions to install 6.2.1 on x86 Ultra and Pro Models. (ARM NOT SUPPORTED by this OS) ...
mdgm and I have decided that its time to lock this thread. So please do post any new OS6 on Legacy issues on their own threads.
maboehme wrote :
From time to time I cannot login via ssh:
May be you have a problem with your two ip addresses configuration on the same NAS in the same subnetwork... Why one static address and one DHCP? Normally, the MTU would be the same within a given network... strange issues are possible when you mix MTU within a subnetwork, and within a multi-NIC server too...
You have one hostname with two IP addresses in the same network... As you described before, Windows use hostname and doesn't like it.
You can try bonding the two NICs in "Adaptative Load Balancing" mode, you don't need any special switch configuration for this mode. You will have only one mac address and one IP address....and one MTU. Go to network menu to activate it.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
