NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!
Update: It is now unofficially possible using NTGR images to update legacy hardware to os6.X See Post #3, for directions to install 6.2.1 on x86 Ultra and Pro Models. (ARM NOT SUPPORTED by this OS) ...
mdgm and I have decided that its time to lock this thread. So please do post any new OS6 on Legacy issues on their own threads.
pywong wrote :
I install fancontrol and did a reboot but it does not work right.
You must not define a very low temperature, otherwise fan run already loud to decrease temperature, and it cannot do this. For example, I think 20°C is too low for system temperature. MINTEMP parameter would be the optimal temp read by the sensor, id normal running temp.
This is the same thing for fan rpm : define MINSTART, MINSTOP, MINPWM as the same value, the optimal value correspond to the lowest realistic rpm value you want to have in normal running.
For example on Ultra6, minimal system temperature would be around 37°C, minimal CPU temp around 51°C, minimal system fan 900 rpm (may be higher on pro6).
Do you remember temp and rpm values with 4.2.xx ? they are the best ones.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
