NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!
Update: It is now unofficially possible using NTGR images to update legacy hardware to os6.X See Post #3, for directions to install 6.2.1 on x86 Ultra and Pro Models. (ARM NOT SUPPORTED by this OS) ...
mdgm and I have decided that its time to lock this thread. So please do post any new OS6 on Legacy issues on their own threads.
The "corrupt root" error mentioned in that article would also be obtained if you put used disks in older ReadyNAS models. From what Skywalker said above it sounds like ReadyNAS OS is even more cautious about wiping used disks than older OSes were. Which is not a bad change as many users have put a disk full of data in a ReadyNAS while it was running only to find the disk was wiped automatically.
I believe a change is coming in the next release to make it clear that if you boot up the NAS with used disks installed that these need to be wiped by doing a factory default.
As mentioned in that review some missing features from 4.2.x are coming.
I believe a change is coming in the next release to make it clear that if you boot up the NAS with used disks installed that these need to be wiped by doing a factory default.
As mentioned in that review some missing features from 4.2.x are coming.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
