OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!

I have a Pro 6 2nd gen with 6 1TB hitachi drives. last night, I updated to 6.0.8 and ran apt-get update and upgrade. I also have fan control running. Here is my fancontrol file

# Configuration file generated by pwmconfig, changes will be lost
INTERVAL=5
DEVPATH=hwmon0=devices/platform/coretemp.0 hwmon1=devices/platform/w83627ehf.2576
DEVNAME=hwmon0=coretemp hwmon1=w83627dhg
FCTEMPS= hwmon1/device/pwm2=hwmon1/device/temp2_input hwmon1/device/pwm1=hwmon1/device/temp1_input
FCFANS= hwmon1/device/pwm2=hwmon1/device/fan2_input hwmon1/device/pwm1=hwmon1/device/fan1_input
MINTEMP= hwmon1/device/pwm2=20 hwmon1/device/pwm1=40
MAXTEMP= hwmon1/device/pwm2=60 hwmon1/device/pwm1=65
MINSTART= hwmon1/device/pwm2=45 hwmon1/device/pwm1=24
MINSTOP= hwmon1/device/pwm2=70 hwmon1/device/pwm1=20
MINPWM= hwmon1/device/pwm2=70 hwmon1/device/pwm1=15
MAXPWM= hwmon1/device/pwm2=200 hwmon1/device/pwm1=150

Here is the output from sensors.

coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +35.0°C  (high = +76.0°C, crit = +100.0°C)
Core 1:       +35.0°C  (high = +76.0°C, crit = +100.0°C)

w83627dhg-isa-0a10
Adapter: ISA adapter
Vcore:        +1.10 V  (min =  +0.00 V, max =  +1.74 V)
in1:         +21.12 V  (min = +15.26 V, max = +12.67 V)  ALARM
AVCC:         +3.23 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:        +3.23 V  (min =  +2.98 V, max =  +3.63 V)
in4:          +6.06 V  (min =  +1.93 V, max =  +7.79 V)
in5:          +1.55 V  (min =  +2.48 V, max =  +2.40 V)  ALARM
in6:          +1.55 V  (min =  +2.48 V, max =  +2.40 V)  ALARM
3VSB:         +3.23 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:         +3.20 V  (min =  +2.70 V, max =  +3.63 V)
fan1:        1350 RPM  (min = 1214 RPM, div = 8)
fan2:        1721 RPM  (min = 1721 RPM, div = 8)
fan3:           0 RPM  (min = 1171 RPM, div = 128)  ALARM
fan4:           0 RPM  (min = 10546 RPM, div = 128)  ALARM
fan5:           0 RPM  (min =  878 RPM, div = 128)  ALARM
temp1:        +41.0°C  (high =  -3.0°C, hyst = +127.0°C)  sensor = thermistor
temp2:        +24.0°C  (high = +80.0°C, hyst = +123.0°C)  sensor = CPU diode
temp3:         +3.5°C  (high = +80.0°C, hyst = +123.0°C)  sensor = thermistor
cpu0_vid:    +0.000 V

Does this look right?

And thank you to everyone for posting their work. I would not have gotten this far without your posts on this forum!